? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macomtech.com for additi onal data sheets and prod uct information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 1 gaas spdt switch 0.05 - 3 ghz rev. v1 MASWSS0176 advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. features ? low insertion loss: 0.35 db @ 2.4 ghz ? moderate isolation: 21 db @ 2.4 ghz ? low current consumption: 5 a @ 2.5 v ? lead-free sot-26 package ? 100% matte tin plating over copper ? halogen-free ?green? mold compound ? 260c reflow compatible ? rohs* compliant version of maswss0005 description m/a-com?s MASWSS0176 is a gaas phemt mmic single pole, double throw (spdt) switch in a low cost, lead-free sot-26 surface mount plastic package. the MASWSS0176 is ideally suited for applications where small size and low cost are required. typical applications are dual band systems which require switching between small signal components such as filter banks, single-band lnas, converters, etc. this part can be used for low power, low loss requirements in all systems operating up to 3 ghz, including pcs, gsm, dcs, satellite radio, blue tooth, and other receive chain applications. the MASWSS0176 is fabricated using a 0.5 micron gate length gaas phemt process. the process features full passivation for performance and reliability. pin configuration pin no. function description 1 rf1 rf port 1 2 gnd ground 3 rf2 rf port 2 4 v2 control 2 5 rfc rf input 6 v1 control 1 functional schematic ordering information 1 part number package MASWSS0176 bulk packaging MASWSS0176tr-3000 3000 piece reel MASWSS0176smb sample board 1. reference application note m513 for reel size information. * restrictions on hazardous substanc es, european union directive 2002/95/ec. rf1 gnd rf2 v1 rfc v2 pin 1 c=39pf c=39pf c=39pf absolute maximum ratings 2,3 parameter absolute maximum input power @ 2.5 v control +26 dbm operating voltage +8.5 v operating temperature -40c to +85c storage temperature -65c to +150c 2. exceeding any one or combination of these limits may cause permanent damage to this device. 3. m/a-com does not recommend sustained operation near these survivability limits.
? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macomtech.com for additi onal data sheets and prod uct information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 2 gaas spdt switch 0.05 - 3 ghz rev. v1 MASWSS0176 advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. electrical specifications: t a = 25c, vc = 0 v / +2.5 v, z 0 = 50 ohms 4,5 parameter test conditions units min typ max insertion loss 0.05 - 1.0 ghz 1.0 - 3.0 ghz db db ? ? 0.3 0.35 0.4 0.55 isolation 0.05 - 1.0 ghz 1.0 - 3.0 ghz db db 20 ? 24 21 ? ? return loss 0.05 - 3.0 ghz db ? 20 ? ip2 two tone +5 dbm, 5 mhz spacing dbm ? 62 ? ip3 two tone +5 dbm, 5 mhz spacing dbm ? 45 ? p1db ? dbm ? 21 ? trise, tfall 10% to 90% rf and 90% to 10% rf ns ? 35 ? ton, toff 50% vc to 10% rf, 50% vc to 90% rf ns ? 40 ? transients in-band mv ? 10 ? control current ? vc ? = 2.5 v a ? 5 20 4. for positive voltage control, external dc bl ocking capacitors are required on all rf ports. 5. insertion loss can be optimized by varying the dc blocking capac itor value, e.g. 1000 pf for 100 mhz - 1 ghz, 39 pf for 0.5 ghz - 3 ghz. lead-free sot-26 ? ? reference application note m538 for lead-free solder reflow recommendations. control v1 control v2 rfc-rf1 rfc-rf2 0 1 on off 1 0 off on truth table 6 6. 0 = 0 v to 0.2 v, 1 = +2.5 v to 5 v handling procedures please observe the following precautions to avoid damage: static sensitivity gallium arsenide integrated circuits are sensitive to electrostatic discharge (esd) and can be damaged by static electricity. proper esd control techniques should be used when handling these devices.
? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macomtech.com for additi onal data sheets and prod uct information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 3 gaas spdt switch 0.05 - 3 ghz rev. v1 MASWSS0176 advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. return loss insertion loss typical performance curves isolation 0.0 0.1 0.2 0.3 0.4 0.5 0.5 1.0 1.5 2.0 2.5 3.0 frequency (ghz) 20 22 24 26 28 30 0.5 1.0 1.5 2.0 2.5 3.0 frequency (ghz) 0 10 20 30 40 50 60 0.5 1.0 1.5 2.0 2.5 3.0 frequency (ghz)
|
